• TwitterFacebookGoogle PlusLinkedInRSS FeedEmail

How To Manually Program Pro-106

How To Manually Program Pro-106

Modern scanners have a plethora of various ports, jacks and sockets on them. Test Drive Unlimited 1 Free Download Full Game Pc. Here is a look at some of them. Taking a look at the rear panel of the BCD536HP scanner there are 6 different ports on it.

From left to right they are: • BNC antenna jack • External Speaker Jack • USB Port (used for WiFi unit only on the 536) • GPS Serial Port • 3-pin power port • Coaxial power port Other common ports on scanners include: • USB programming port • Record jack • Headphone jack • Various serial ports. Let’s look at each port and what it is used for: (*Bonus! See below for an explanation of the weird hole smack in the middle) Antenna Jack: Of course this is used to connect an antenna to the radio. Most scanners these days use BNC, the little push and turn job you see in the picture.

How To Manually Program Pro-106

Some handled scanners use the smaller SMA connector. Some older scanners had Motorola or even SO139 connectors and some had both an external connector and an internal threaded connector with a hole in the case to insert it. Universal Driver Android Xda. External Speaker: These are used to plug in an external speaker and are different than headphone jacks. Speaker Jacks do not limit the volume like a headphone jack will. When you plug in a speaker into the external speaker jack the inside speaker is disconnected.

Headphone Jack: The Headphone jack has a limiting circuit to protect from overly loud sound that can damage your hearing. Otherwise it works much like the external speaker jack. Headphone jacks are usually in the front panel of desktop scanners while speaker jacks are usually on the rear. Handheld scanners usually just have a headphone jack on the top. Geotechnical Earthquake Engineering Kramer Solution Manual Free Download. Record Jack: The Record Jack allows one to pull audio from the scanner at a constant level that is not affected by the volume control. This is important when the radio is used as a source for recording or streaming. Some older RadioShack scanners and some current Uniden scanners have record jacks.